Back to 57MM-WR03 Product Page

Knowledge Base

How to configure your router as a wired repeater


1.Turn your Router on and after the Wifi signal is detected by your device, select it. (starting ‘Ruijie-sxxxx’)

2.Open your device’s web browser and enter the recommended IP address from the manual into the address bar (normally 192.168.110.1)

3. You should now see the Ruijie web portal…select ‘Configure’

4. 4. Select ‘Repeater’ and then ‘Check’


5. Create an SSID and Password (same or separate from any existing WLAN) and create a ‘Management Password’ for future access
and ‘Save’

6. ‘Finish’ should be displayed listing the SSID, password and Management (Admin) password

7. Check your device’s Wi-Fi setup to confirm the newly created
Wi-Fi signal.

Download Page

Page Feedback

Products related to page: 57MM-MR01, 57MM-MR02, 57MM-WR02, 57MM-WR03, 57MM-WR04

Page last updated: 4 January 2024, 2:29 PM (AEST)