34MM-EARC50 - 50m HDMI™ eARC Audio Extender
Front View

50m HDMI™ eARC Audio Extender

34MM-EARC50

Coming Soon

Product Badge

Product Summary

This audio extender can transmit HDMI™ eARC/ARC audio signals over a single CAT5e/6 cable. The transmission distance is up to 50m/164ft. It supports CEC pass-through and bi-directional IR pass-through. This is a fantastic plug-and-play solution for sending HDMI eARC/ARC audio from an HDTV to an amplifier, sound bar, AVR or multi-room audio system.
View More Audio Video Cable and Accessories

Features and Benefits

  • Extend HDMI™ eARC/ARC audio signal up to a distance of 50m/164ft
  • Support audio formats: eARC: LPCM 2.0/5.1/7.1CH, DD, DD+, DTS, Dolby TrueHD, DTS-HD MA, Dolby Atmos. ARC: LPCM 2.0CH, Dolby 5.1CH, DTS 5.1CH
  • Support CEC pass-through for source control and auto on/off
  • Support bi-direction IR pass-through

Specifications

Technical
Transmission Distance50m/164ft over CAT5e/6 cable
Audio FormatseARC: LPCM 2.0/5.1/7.1CH, DD, DD+, DTS, Dolby TrueHD,
DTS-HD MA, Dolby Atmos
ARC: LPCM 2.0CH, Dolby 5.1CH, DTS 5.1CH
ESD Protection IEC 61000-4-2:
±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection - Transmitter
Input1× IR IN [3.5mm audio jack]
1× eARC IN [HDMI Type A, 19-pin female]
Output 1× CAT OUT [RJ45]
1× IR OUT [3.5mm audio jack]
Control 1× SERVICE [USB Type C, upgrade port]
Connection - Receiver
Input 1× IR IN [3.5mm audio jack]
1× CAT IN [RJ45]
Output1× eARC OUT [HDMI Type A, 19-pin female]
1× IR OUT [3.5mm audio jack]
Control 1× SERVICE [USB Type C, upgrade port]
Mechanical
HousingMetal Enclosure
ColorBlack
DimensionsTransmitter/Receiver: 68mm [W] × 74mm [D] × 20mm [H]
WeightTransmitter/Receiver: 142g
Power SupplyInput: AC 100-240V 50/60Hz; Output: DC 5V/1A
(US/EU standard, CE/FCC/UL certified)
Power ConsumptionTransmitter: 0.95W (Max); Receiver: 1.6W (Max)
Operating Temperature0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature-20°C ~ 60°C / -4°F ~ 140°F
Operating Humidity20%~80% relative humidity, non-condensing
Storage Humidity10%~90% relative humidity, non-condensing
  • This field is for validation purposes and should be left unchanged.

You may also need